How to Make a Cell Cell phone Circumstance

Cell phones arrive in quite a few designs and dimensions, and acquiring a case to healthy your cell phone can sometimes be challenging and pricey. Luckily for us, generating a tailor made mobile phone scenario is a lot easier than you’d think. You can quickly make a circumstance at house using a very hot glue gun or some silicone and cornstarch. You can also make a simple slip address out of felt. If you now have a plastic scenario, then why not&nbspdecorate it&nbspto make it stand out?

&nbsp

&nbsp

&nbsp

Approach1

Creating a Warm Glue Mobile Telephone Case

  1. Tape a template to the back of your cell phone, if ideal.&nbspMaking a sleek circumstance is challenging with sizzling glue, so most folks decide on to do designs, these types of as swirls or mandalas. You can cost-free-hand the pattern, or you can trace it. If you want to trace it, do the following:

    • Trace your phone onto a sheet of paper.
    • Draw your pattern applying a black marker. Make confident the style touches the sides.
    • Minimize out the template alongside the outline.
    • Tape the template to the back again of your telephone.

    &nbsp

    &nbsp

    &nbsp

  2. Wrap your telephone like a current with parchment paper.&nbspCut a sheet of parchment paper that is about twice the dimension of your cell phone. Spot your phone on best, with the display screen facing up. Wrap the paper above the aspect edges of your phone, then protected them with a piece of tape. Wrap the top rated and base edges, and safe them with tape as properly.

    • Wrap your phone as tightly as you can.
    • Make sure that the telephone is turned off 1st to prevent overheating.
    • Make absolutely sure that you are taping all the things on the&nbspfront&nbspof the cell phone.

    &nbsp

    &nbsp

  3. Mark off the camera, sockets, and buttons with a pen or coloured pencil.&nbspThese will be your guidelines so that you never unintentionally deal with them with hot glue.

    • Make absolutely sure that the color you use shows up versus your cellular phone.

    &nbsp

    &nbsp

  4. Outline the sockets, buttons, and camera.&nbspThis also contains the speaker and mic holes as perfectly. If you address them up, you never be equipped to use your mobile phone adequately.

    &nbsp

    &nbsp

  5. Fill in the side edges.&nbspMake sure that you make them great and thick. Also, make confident that you prevent the buttons and sockets.

    &nbsp

    &nbsp

  6. Fill in the back.&nbspAgain, sizzling glue is not the ideal medium to generate a completely clean circumstance, so your ideal bet is to make a texture of pattern. Whichever you pick, make sure that all the lines link to the sides of the mobile phone as effectively as to just about every other.

    &nbsp

    &nbsp

  7. Define the entrance.&nbspYou can just draw a slim line around the front of the cellular phone, suitable following to the aspect edge. You can also make a series of little dots as a substitute. This will give your situation a lip and assistance it continue to be on your telephone.

    &nbsp

    &nbsp

  8. Remove the scenario and the parchment paper.&nbspOnce the glue has hardened, peel it off of your phone. Eliminate the parchment paper from the cellphone next. At this stage, it would be a excellent concept to check the circumstance on the phone. If there is any glue masking a button, socket, and many others., then you can lower it away with a craft blade.

    &nbsp

    &nbsp

  9. Paint the circumstance, if preferred.&nbspOnce you are satisfied with the situation, acquire it off of the cell phone. Paint the outside with nail polish, then enable the polish dry.&nbspIf you want the circumstance to be a reliable shade, you can use spray paint instead.

    &nbsp

    &nbsp

&nbsp

&nbsp

Strategytwo

Producing a Silicone Mobile Phone Scenario

  1. Place on plastic gloves and guard your do the job surface area.&nbspCover your counter with plastic wrap, parchment paper, or wax paper. You can also get the job done on prime of a marble counter or a glass sheet instead.

    • Attempt to operate in a perfectly-ventilated location. Silicone can have a potent odor.
    • The silicone utilized in this strategy is&nbspnot&nbspthe very same as scorching glue.

    &nbsp

    &nbsp

  2. Evaluate out your cornstarch and distinct silicone.&nbspPour some cornstarch onto a sleek counter or into a glass bowl, then squeeze some obvious silicone onto it. The measurements will not have to be exact you just want to have far more cornstarch than silicone. Approach on using about five tablespoons (fifty grams) of cornstarch and two to 3 tablespoons (30 to forty grams) of silicone.

    • Make sure that you are applying distinct silicone. You can locate it in home improvement suppliers. It arrives in a syringe.
    • If you can’t find cornstarch, glimpse for cornflour. You can also use potato starch as a substitute.

    &nbsp

    &nbsp

  3. Look at incorporating some shade.&nbspYou really don’t have to do this, but it a great way to make your mobile phone case glance a lot more attention-grabbing. If you really don’t do this, your cellular phone circumstance will look white. You use a number of drops of liquid dye, liquid watercolor, food stuff coloring, or acrylic paint.

    &nbsp

    &nbsp

  4. Knead anything jointly right until the silicone turns to dough.&nbspYou will need to knead it about 20 moments or so. You will not choose up all of the cornstarch, which is normal. The dough may perhaps search crumbly at 1st–just hold kneading!

    &nbsp

    &nbsp

  5. Roll the dough into a flat sheet.&nbspYou can do this with a rolling pin, a glass, a wine bottle, or even a spray paint can. Hold rolling Cute Mobile Cases up until you have a sheet a tiny bigger than your phone. It must be about ⅛ inch (.32 centimeter) thick.

    &nbsp

    &nbsp

  6. Area your cell phone on leading of the sheet.&nbspMake positive that your screen is going through upwards, and you have equal amounts (or near to it) of dough sticking out above every single facet.

    &nbsp

    &nbsp

  7. Wrap the dough about the sides and top of your cell phone.&nbspSlide a paint spatula underneath the dough, then carry it up and fold the dough around the sides of the cellphone. Sleek out any creases or wrinkles check out to be as neat as doable.

    &nbsp

    &nbsp

  8. Use stamps to indent types, if desired.&nbspFlip your cell phone about and dust it with cornstarch. Use a stamp to indent designs into it. You can also use cardboard cutouts instead to produce your possess, unique models. Lift the stamp absent when you are finished.

    • If you want to make a quilted design, enable the silicone harden for about ten to twenty minutes, then dust it with cornstarch. Use a knife to make cross-crossing diagonal strains in a diamond/quilted pattern.

    &nbsp

    &nbsp

  9. Permit the silicone dry in advance of taking away it.&nbspHow very long this normally takes is dependent on the style of silicone you utilized and the climate condition. It may just take just two several hours, or it may well acquire 24 hours. At the time it is dry and sound to the contact (you can’t dent it), pull it off of your telephone.

    • If the situation is dusty within, wipe it down with a damp fabric.

    &nbsp

    &nbsp

  10. Trim the excessive silicone away from the front.&nbspCut it about 7 millimeters absent from the aspect edges, and one centimeter away from the top and base edges.Alternatively, you can lower alongside the indentations induced by the seam between the phone’s display and scenario.

    &nbsp

    &nbsp

  11. Lower out any indentations.&nbspIf you were to glimpse inside your cell mobile phone situation, you’d see little indents prompted by the digital camera, flash, buttons, and sockets. Lower all of these out utilizing a sharp craft blade.

    • You can also carve a rectangle or trapezoid into the top and/or base edge for the speaker instead of cutting out a slot.

    &nbsp

    &nbsp

  12. Sand the situation easy, if desired.&nbspYou can use additional raw silicone on prime if you want to, then smooth it out with a paint spatula or popsicle adhere.

    &nbsp

    &nbsp

  13. Paint the stamped places with nail polish, if preferred.&nbspChoose a coloration that goes well with your scenario. Metallic colours, these as silver, get the job done specially very well!

    • You can make a lot more shapes out of silicone independently, let them dry, paint them with nail polish, then glue them to the situation with a drop of apparent silicone.

    &nbsp

    &nbsp

&nbsp

&nbsp

Approach3

Making a Felt Cell Mobile phone Case

  1. Reduce a piece of felt in fifty percent widthwise.&nbspIf you want a thicker mobile phone scenario, use two items of felt as an alternative. They can be the exact shade or contrasting hues.

    &nbsp

    &nbsp

  2. Slice the items &frac12 inch (one centimeter) larger sized than your cellphone.&nbspPlace your cellphone on best of the to start with piece of felt. Trace all-around it employing a &frac12-inch (1-centimeter) border. Cut the felt out, then use it as a template for the other piece(s).

    &nbsp

    &nbsp

  3. Location your cellphone concerning the two pieces of felt.&nbspMake positive that all of the edges and corners are aligned. If you are making a lined situation, with two diverse colors of felt, select just one coloration to be on the inside of, and the other colour to be on the outside the house.

    &nbsp

    &nbsp

  4. Pin the parts of felt about your cellphone.&nbspYou only want to pin the bottom and two facet edges leave the top edge open up. Try to pin the felt as tightly about your phone as you can. The match will be snug at 1st, but it will ultimately loosen up.

    &nbsp

    &nbsp

  5. Take out your phone and sew alongside the pinned edges.&nbspUse the pins as a guideline as you sew. Your seam allowance will vary, depending on the thickness of your cellphone. You can do this on a sewing machine or by hand.

    • If you are performing this by hand, contemplate working with embroidery floss in a contrasting color.
    • If you are performing this on a stitching machine, backstitch at the begin and stop of your stitching.

    &nbsp

    &nbsp

  6. Trim down your seam allowances.&nbspTry to slice as shut as you can to the stitching, about ⅛-inch (.three centimeters).&nbspFor a a lot more distinctive glance, use pinking shears rather.

    &nbsp

    &nbsp

&nbsp

&nbsp

mustafa zorbey

17.02.2012 tarihinde İstanbul Fatih te dünyaya geldim. Eyüpsultan Halit Derviş İbrahim ilköğretim okulu 4/D sınıfında okuyorum… Deneyimlerimi ve öğrendiklerimi sizinle paylaşmak için bu siteyi açtım..

Bir cevap yazın